Nexans Essential 1HU Optical Fiber Patch Panel has been designed to support : up to 24 ST ports or up to 12 Dual SC ports. It combines a cost effective design with high port density. It is suitable for tight buffer cables (direct termination) or loose tube cables using splice tray It also can be used as a splitter.

Optical fiber accessories to complete all Nexans OF products, patch panels, ZD boxes, splitter box. Designed for the installation of zone wiring, fiber to the office, fiber to the desk and backbone connections. Suitable for tight buffer cable (direct termination) or loose tube using splice tray and pigtails Compatible with all Nexans ST or SC patch panels, zone distribution boxes and splice box.

Nexans offers a large range of Fibre Optics connectors for field termination practices. All these connectors meet most recent standard ISO 11801 releases. Connector type available : SC , ST , LC .For optimal installations, Nexans recommends to use its Anaerobic Toolkit . This toolkit provides a comprehensive set of tools and consumables for easier on-site jobs and is supplied with illustrated installation manual.

This range of outlets is suitable for any environment: ducts, cover plates and surface mount boxes (including 45 fittings). The range features Snap-in adaptors for fast and easy installation .For the specific information on the Snap-in adaptors , refer to the corresponding datasheets.

Nexans LAN mark-OF  patch cords are available in all standardized optical fiber classes, multimode and single mode. The MM62.5 version is designed for use in an OM1 compliant system, the MM50 version for OM2 systems and the MM50 OM3 version for OM3 systems. The single mode version is OS1 compliant. The multimode versions can be used in laser optimized systems using the LAN mark-OF xt cables.

Fiber assembly to terminate cable with fusion splicing . Available with ST, SC, LC and MTRJ connectors. Suitable for use in patch panels using splice cassettes. The pigtails can be stripped in one action over a long  distance of up to 1 m. Insertion loss: typical value is 0.1 dB, maximum value is 0.3 dB. 

LAN mark-OF Snap-In adapters have been designed for snapping into the modular OF patch panels and ZD boxes. They are available in single SC, dual SC, LC duplex and MT-RJ version. The 2 Small Form Factor connector types offer double density, as two fiber connections are offered on the SC- type footprint. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices. LC and SC versions are available in Multimode and Single mode, MT-RJ is only available in Multimode.

Accepting the range of ST couplers or LAN  mark-OF snap-ins, these patch panels with sliding mechanism facilitate front side installation. Suitable for tight buffer cables (direct termination) , Loose tube cables using Splice Cassette / pigtailed terminations. Accepts pre-terminated cable assemblies.

Designed for the installation of zone wiring, fiber to the office and to the desk . Suitable for tight buffer cable (direct termination) or loose tube using splice tray Compatible with all LAN mark-OF accessories.

Nexans UC loose tube bre cables have been designed for applications where a high level of installation, environmental and optical features are required.The construction is suitable for use outdoor in ducts and for direct burial. It consists of a corrugated steel tape armouring providing full rodent protection. The tube is gel lled and has a capacity of up to 24 bres. It is surrounded by glass yarns. The cable has a HDPE outer jacket.

Nexans UD loose tube fiber cables have been designed for applications where a high level of installation, environmental and optical features are required. The construction is suitable for use outdoor in ducts and for direct burial. It is a full dielectric armoring design providing rodent resistance. The dielectric armoring consists of half FRP elements and half fillers. The tube is gel filled and has a capacity of up to 24 fiber. The cable has a HDPE outer jacket.

Nexans UT loose tube fiber cables have been designed for applications where a high level of installation, environmental and optical features are required. The construction is suitable for use indoor or outdoor in ducts. It is a full dielectric design providing rodent resistance. The tube is gel filled and has a capacity of up to 24 fiber. The cable has a frame retardant halogen free outer jacket and incorporates glass yarns.

-OF Tight Buffered optical fiber cables have been designed for applications where a high level of installation, environmental and optical performance is required. The tight buffered range is most suitable where direct termination is required The majority of the tight buffered cables are suitable for both internal & external environments and are all dielectric with excellent frame retardance.

LANmark-OF Tight Buffered optical fiber cables have been designed for applications where a high level of installation, environmental and optical performance is required. The tight Buffered range is most suitable where direct termination is requiredThe majority of the tight Buffered cables are suitable for both internal & external environments and are all dielectric with excellent frame retardance.

LANmark-OF ZC optical fiber cables have been designed for applications where a high level of installation, environmental and optical performance is required. The ZipCord range is most suitable for direct termination in patch assembly and in risers and horizontal cabling .The majority of the tight Buffered cables are suitable for both internal & external environments and are all dielectric with excellent frame retardance.